Config of CX knitting line machines.Descripción completa
nokia cm editor
GPON ZTE
TM
SIAE ALCplus-Config
GPON ZTEDescripción completa
EDU
Descripción: CondMat
HW Config
Configurable Components
AS
OS
Adapting HW Config
1
2
3
Adapting HW Config
1
2
3
Exercise: AS HW Config (Central AS) Slot 1
3
5
6
PS 407 CPU CP CP 417-4DP DP Eth ( UR1 or UR2) X1 X2
MPI
DP ET 200M PS
PROFIBUS address
IM 153-2
SM
SM
SM
SM
Exercise: AS HW Config (PROFIBUS DP CiR Compatibility) PS 407 CPU 417-4DP
CP CP DP Eth ( UR1 or UR2)
MPI DP
CiR PS PROFIBUSaddress ET 200M
IM 153-2
SM
SM
SM
SM
Exercise: AS HW Config (PROFIBUS DP Set Parameters for CiR Object)
Max. bytes per slave
10 x 244 = 2240 I / 2240 O Must be made available as PII/PIQ via the CPU properties!
Exercise: AS HW Config (Set Parameters for PROFIBUS DP CiR Module)
Exercise: AS HW Config (CPU process image partition) PIP process image partition = PIPI (inputs) + PIPO (outputs)
CPU OS
PIPI1
DP master buffer Inputs
OB32 2
OB32
PIP1 Trt
PIPO1
OB35
PIPI2 3 OB35 PIPO2
1
IM 153
PIP2 Outputs
DO
AI
P I P 2
P I P 1
Exercise: AS HW Config (CPU process image partition) PIP process image partition = PIPI (inputs) + PIPO (outputs)
CPU OS
PIPI1
DP master buffer Inputs
OB32 2
OB32
PIP1 Trt
PIPO1
OB35
PIPI2 3 OB35 PIPO2
1
IM 153
PIP2 Outputs
DO
AI
P I P 2
P I P 1
Exercise: AS HW Config (Driver Concept/Symbolic Channel Names) PS 407 CPU CP CP 417-4DP DP Eth OB 32 <-> PIS 1 (UR1 or UR2)
OB 35 <-> PIS 2
MPI DP
PS PROFIBUS addr.
IM 153-1
SM
SM
SM
SM
T P A 1
T P A 1
T P A 1
T P A 1
Name_channel_0 Name_channel_1
Exercise: AS HW Config (Driver Concept/Symbolic Channel Names) PS 407 CPU CP CP 417-4DP DP Eth OB 32 <-> PIS 1 (UR1 or UR2)
OB 35 <-> PIS 2
MPI DP
PS PROFIBUS addr.
IM 153-1
SM
SM
SM
SM
T P A 1
T P A 1
T P A 1
T P A 1
Name_channel_0 Name_channel_1
Compiling and Downloading the AS HW Config
Downloading the Hardware Configuration only takes place after the following steps have been carried out with NetPro:
The network configuration has been carried out and connections from the ES to other stations (PC, AS) were set up.
Connections were also configured between the devices (AS, OS) to allow data exchange during process runtime.
Go to the chapter on NetPro first
Exercise: SIMATIC PC Station/OS HW Config
Exercise: SIMATIC PC Station/OS HW Config Station Configuration Editor was created with PCS 7 when the PC was installed. Is configured according to the subsequent use of the PC as ES and/or OS
SIMATIC PC station HW Config is configured in the project in the SIMATIC Manager and downloaded to the target PC.
Compiling and Downloading the OS HW Config
Downloading the Hardware Configuration only takes place after the following steps have been carried out with NetPro:
The network configuration has been carried out and connections from the ES to other stations (PC, AS) were set up.
Connections were also configured between the devices (AS, OS) to allow data exchange during process runtime.
Go to the chapter on NetPro first
Exercise: Download the AS HW Config to the PLC (1) 1 PS 407 CPU 417-4DP
MPI 1
DP
CP CP DP Eth
UR1 or UR2
Ind. Ethernet 2 2
Exercise: Download the AS HW Config to the PLC (2) 1
3
You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial
Exercise: Download the AS HW Config to the PLC (Check CiR Compatibility - 2)
Exercise: Download the AS HW Config to the PLC (Check CiR Compatibility - 3)
?
Exercise: Download PC Configuration Download to target
