Atomic Alignment – Aetheric Diodes and Magnetization I have a theory on Why magnets function the way they do. Feng Shui is all about arranging items and placing things in certain positions so that the Natural energy can flow more easily in a room, temple, etc. Lo Shu’s “Magic Squares” and John Searl’s “Law of Squares” is a method of finding a way to arrange material objects, or the atoms making up an object, in certain orders which result in diode / Uniform movement of natural energies which normally bump randomly around us on various scales at infinitum. “Magnets are Nature’s Feng Shui at the atomic level.” --Jason Verbelli
Imagine a wind tunnel. It channels the current of air. There is pressure in the atmosphere all the time and because there is varying pressure, there is constant wind movement. There are many factors contributing to the wind blowing in the many directions it blows. Tunnels just give a path for that randomly bumping air to move in a more uniform and ordered fashion. A Brick wall doesn’t survive in a hurricane because there is a lot of resistance on the face of the wall. A Geodesic Dome will survive a hurricane because it channels the already existing streams of wind in a more natural motion around itself which reduces resistance and impedance. A cubic tunnel is not as effective at channeling air as a rounded tunnel. A tunnel shaped like a Phi Spiral would be Much more effective than a straight lined tunnel. Sending water down a whirlpool is much easier than pushing it through a pipe. Nikola Tesla hinted to this regarding pushing electricity through wires.. Here is a picture of a microscope image taken of a butterflies wing. Next to it is a desert. And under that is a close up of a fingerprint. Notice the wind patterns in the desert match the wings and prints.
“For every Chaotic action in Nature , there is a possible inverse scenario that Man can consciously create which will restore order and regulate the flow of Nature. Regulating the flow of Nature in an ordered manner yields the inverse results of Nature’s Chaotic Action.” The action of the wind makes the sand form patterns. The inverse would be that if you arrange the sand to form patterns... the wind must be channeled through that pattern. So, if you were able to arrange the sand in a different pattern and retain that shape... the surrounding wind MUST blow through there according to the shape at which you consciously created.
If an electric current re-arranges the orientation of atoms... then the orientation of atoms must regulate the flow of electric current..
Nature’s “fingerprint” again as seen in the sand, the wing and the thumb.
That which happens on a Micro scale also applies on the Macro Scale.
Atomic Feng Shui would be arranging the atoms making up a material so that they’re in different alignments and then locking them in place so that the natural currents of Aether are channeled through and around that material. This is the basis of Professor John Searl’s magnetization process. Aether is like the randomly bumping energy present everywhere in the Universe. (As Paul Dirac and Nikola Tesla emphasized) http://en.wikipedia.org/wiki/Dirac_sea The Universe operates perfectly at Absolute Zero. (0 Kelvin) ANYthing above 0 Kelvin is an EXCESS of energy. 0 Kelvin is absolute stillness. Even in the depths of space, the lowest recorded temperature is about 4 Kelvin; therefore, there is an excess of energy Everywhere. The atomic currents of random and subtle energies (Aether) becomes useful when set in ordered motion. (“Coils make magnetic current useful.” - Ed Leedskalnin) Ordered (Uniform) motion is channeling something in 1 direction or a constant flow rather than bumping around willy nilly. The intensity of the wind at sea level is much less than at the top of the atmosphere. The intensity of the wind in deep space is MUCH LESS... but STILL there. We think deep space has no wind.... but it does on the atomic level.
That energy is so subtle that we can’t feel it on our scale.... but atoms do. (fluidal energies / fluidal forces) . . Water crashing on the sea shore is random motion. Water swirling in a whirlpool is uniform motion. Water traveling through a pipe is also uniform motion but encountering constant resistance along the way. Remember Bruce Lee’s quote, “...now water can flow, or it can crash. Be Water my friend.” There is pressure everywhere in the universe, just like there is pressure everywhere in the atmosphere. Energy is in constant random motion. When that excess of randomly moving energy all around us (Aether) is set in motion, Science calls that an electric current. If you have a wind tunnel with spikes sticking out inside the tunnel like stalagmites, the wind will encounter resistance once you start a flow of wind through the tunnel. If you angle those spikes the right way in the tunnel, it will improve the flow. This is an example of impeding flow on a macro scale. Randomly placed stalagmites.
We want to imagine those spikes as atoms making up an object. The wind blowing through the tunnel would represent the Random energy all around us, set into motion. As the wind blows through the tunnel it becomes ordered. If you are able to orient the atoms making up a material in a certain way... when you send an electric charge through that material, it will act as a diode and ACCELERATE the electricity rather than impede it.
There is an example of channeling currents of energy on the micro scale. The Diffusion of sound and heat from a porous material.
The same principle as when you have a bunch of straws in a bundle. As the air passes through the different length and sized straws, the air is diffused at different frequencies. But the straws are all straight pipes which is still impeding a lot of current.
Imagine a movie theater or classroom.
All the people are sitting in the same direction in a theater or a classroom. That’s order. That’s a magnet.
If all the atoms making up a metal (or any material) are facing the same direction... that’s called a magnet.
If everyone in the movie theater was facing different directions. There would be no order.
Now imagine a dance floor. Here we have No order:
But here we have order:
When atoms are aligned the same way, they act as a diode for the natural currents of energy randomly bumping around. The people’s arms on the dance floor on the previous page are acting as wind tunnels, so any wind current in the room will flow much easier than if people were randomly oriented. That’s why it gets so hot on the dance floor. If everyone moved the same way at the same time, the air would help keep everyone cool. Same concept in Shaolin, Aikido, the Military, etc. Move as One. . . Watch the video below. From 1 second- 25 seconds, the atoms are aligned as if a material is a magnet. From 30 seconds - 51 seconds, the atoms are in random order like a piece of metal not magnetized. http://www.youtube.com/watch?v=P0YuwCphcRU The atoms are still there making up the object as a whole. But when they are in a random spin... the object is not a magnet. Just like the same people can be on a dance floor, but they can be situated randomly, or uniformly (orderly). When the sum of the parts are aligned, the object as a whole can act as a diode for the surrounding currents on various scales. Depending on the scale at which you align things, will determine the intensity of Aetheric Flow (electric current). The smaller the ordered scale relative to us... the more energy out and the higher the frequency needed to order the smaller scales.
The same chemical composition can have many different structural shapes. The same atomic make up can be oriented differently.
A reason why a magnet is a magnet... is because the “atoms” making up the metal are all facing the same direction, leaning at the same angle, etc. When the atoms are aligned they act as a diode for the natural flow of energy all around us. Energy is normally randomly bumping everywhere. No particular order. A diode creates order and makes energy flow in 1 direction.
Now, if you align the atoms of a material to form a swirl like water down a drain... then the energy will flow accordingly around that material in 1 direction.
Normal magnets have an atomic alignment in a straight line. Like a crowd of people all facing towards a teacher in a classroom. (haha)
But what if the stage was in the center of the crowd and everyone was leaning to 1 side? The flow of energy would be toroidal and very different.
The world only believes in magnets where the atoms are aligned like an audience facing a movie screen. (Thus Plato’s “Allegory of the Cave)
Ancient cultures give us clues. Watch the Monkey Chant from “Baraka” The people represent “atoms” making up a material and the flow of energy. http://www.youtube.com/watch?v=RkxuPxdsZ58
Atomic alignment carves a path for energy. Humanity only believes in straight paths. Like Aquaducts or irrigation ditches. When you send an electric charge through a material, it Realigns the atoms to face the direction of the electric current. I think Professor John Searl’s magnetization process locks in the atoms to lean in specific formations. (Sine Waves at harmonic frequencies) Like a serpents tail rather than a straight line like people in a theater. That means all the atoms are leaning to form a wave. In order. And you can always have More order. Side by side, the material itself looks the same as any other magnet... but the atoms are leaning differently and locked in place. That process allows for the natural random bumping energy to start flowing in those “magnetic aquaducts” on the atomic level. And there are deeper channels in magnets made using higher frequencies which allow more current to flow within it. Making the energy slither rather than run straight like normal magnets.
Imagine a hose shooting out water. That’s a standard electric current. When the water comes out the hose it arcs before hitting the ground. No matter where you are in the world... the water will always come out the hose the same. This is Ohm’s Law.
But what happens if you shake the hose up and down while the water comes out? Ohm’s Law still applies, but there is a harmonic resonance involved which induces that current to form a sine wave to the frequency that you are shaking the hose.
You would have to know the particular rate that the person is shaking the hose, the intensity, the type of hose, the intensity of water, and MANY other factors that the current industry does not account for. What would you have to do, in order to get the water to duplicate a perfect sine wave? You’d have to modulate something with a computer that shakes the hose at a certain frequency. Everyone would shake the hose slightly different which makes the current come out different. But No One vibrates the current of electricity while magnetizing a material, let alone at harmonic frequencies, chords or octaves.
That’s an electric engineering issue. Nothing is being created or destroyed. All the magnetization process is doing is allowing for a current of random energy to flow in an ordered fashion on a certain scale. Normally, the energy is not harnessed on that atomic scale unless force and violence is used to force the currents through the channels. (Nuclear) That’s like trying to fit a square peg through a round hole…. Way to go Humanity… “when all else fails, use violent force” seems to be the attitude. This is nuclear technology… FAIL!
In order to create atomic alignment to create sine wave shaped paths, you would have to have timed charges in the right location, so as the current comes out, it affects the path and induces a specific wave. That’s a key to John’s Searl’s process. The magnetic rollers are magnetized 90 degrees out of phase to the stator.
And then having to loop that current in a donut (torus) and Also make it form a sine wave in a circle.
As the rollers orbit the stator, they act like Helical Magnetic Gears with skewed threads.
A material magnetized using Searl’s specifications will yield exponentially more energy because an electric current is the ordered flow of heat on various scales. More order, more output. A normal magnet will experience Maximum eddy currents with Minimum yield because those deeper atomic channels are shut or “out of order.” While that normal magnet is in motion in front of a coil, it won’t get much as if you hade a structured and harmonic lattice acting as a diode. While that same mass is in motion, it will yield MUCH more energy because there is more flow within it. As the magnetic rollers orbit the stators, that wind is throw outward from the centrifugal force. Wind on our scale is plasma to an atom. And if you can generate a harmonic atomic wind outward radially, you can catch that wind with conventional coils. Atomic wind is called an electric current when it’s in ordered motion in 1 direction. If random wind is blowing Into an ordered lattice, it will have order on the way out. (Coherent Currents) Metals accept any shape charge sent through it. Wood needs a specific shape charge or it burns! same with brick.... or anything,
Once you apply Walter Russell’s Multiplication Principle, you can couple that with John Keely’s Laws of Sympathetic Vibration to align a material according to its ideal lattice.
Fractal Answer to Square 4
Draw a line through all the numbers that add up to the same sum. Draw a square where all 4 points land on numbers adding up to the same sum. The 2D lines are as if you are looking through a 3D cube.
On the previous page was a 2D representation of a 3D crystaline structure. See 2D, Think 3D and then always add Spin. When the numbers are in order as we know: 1 2 3 4 etc, each row will add up to the different sums. In the perspective of the Universe, there is only order in Feng Shui. We need to have things SEEMINGLY in random order so that no matter how you add them up.... no matter how the wind blows through, it results in the same uniform wave or the same sum from all directions. Blow air through any part of that crystal and it will evenly diffuse. Send a beam of light through any part of that crystal and it will evenly disburse. Send an electric current through that lattice and it will evenly distribute. Marcel Vogel was a man who helped IBM become the company it is today. Walter Russell is a well respected name also. His work in crystallography should be given much more consideration.
A CALL TO MATHEMATICIANS: Mass DOES NOT Equal Energy. There are more variables not being accounted for. The ORDER of the atomic lattice dictates how much MORE energy you can get from that SAME Mass in motion. There are different scales of motion. While you think you are stationary in your chair, your cells and atoms are moving busily about. You THINK and OBSERVE yourself as stationary in your room, but there is always more motion than what you can see. Stationary on our scale is 0. But to an atom.... that 0 is more like Planck's constant. If you have the lattice aligned deep enough in an atomic structure…..the parts making Up the atom.... the parts of the parts of the parts, etc…. then the mass would not have to exert the same amount of force to achieve the same output. YANG – Outward. YIN – Inward. The outward equation is that you would need to have more mass to get more energy. F = ma The inward equation is that you would need to align the lattice of the mass you have to get more energy with the same amount of force. This happens because of the atomic currents are filling a deeper channel within the lattice of that aligned material. The same chemical composition can have many structural orientations in the lattice. You can't get more out than in. But what IS the output? It's a wind. Heat blowing through a lattice which = order.
0 to us is like the "speed of light" to an atom. Room temperature heat to us is plasma to an atom. There are different scales. All the math for physics is referring to outward actions which reap outward results. We need to have an equation to refer to the alignment of the atomic lattice correlating with energy output. Different alignments = different outputs. Raw elements as we use are MINUMUM OUTPUTS. MORE ORDER = MORE OUTPUT You can only create so much order on a given scale. And then you can cube the square and get exponentially more. Infinite potential. You can always create more order and detail to reap more potential. The more order on the atomic and interatomic level.. the more output. A charged particle is a particle whos atomic lattice is structured in a way as to allow an even atomic airflow through it. That = an electric charge / ionization. The deeper the alignment, the higher the charge of that same particle of mass; therefore, the farther and faster it can go with the same amount of force. Once it's in motion, you can calculate the rate it dissipates as normal. That is what an electron IS. An electron is a measurement of the conversion of energy. It’s not some fallacious particle orbiting the non existent nucleus of an atom. Are there calories orbiting your fat cells? No. A calorie is a unit of measurement for the conversion of energy on a particular scale. Conversion of energy means diverting some of that current. On the atomic level, more order allows for more air flow through the lattice. More air = more power. Ordered Air flow on the atomic level is called an electric current on our scale. Any material aligned and locked in that state would be electric with a constant even flow of energy all around it. Like a battery that never runs out. If the alignment was deep enough, it might even shock you if you touched it.
The electron theory invented by Neils Bohr was never substantiated or observed and still has not been to this day. No One has ever seen an atom or it’s so called parts as they show in the cartoons and text books. The original model slowly shifted from a ball orbiting an atom to an anomalous cloud with balls popping in and out of existence. I highly encourage people to look into the wise work of Dewey B Larson. The Case Against the Nuclear Atom. http://www.reciprocalsystem.com/dbl
And also the Electric Universe Model:
Scientists are seeing charged magnets on extremely small scales. They don’t know how to account for Neutrinos and all these things particles popping in and out of existence because they have no conception of the inner order of things. They only know outward order. John Searl's Law of Squares is a way to find the ideal inner order structure of a given element, and can also calculate a lot more. It’s so involved, John Searl literally wrote over 30,000 pages in 100 different book sets with even more books of data. Each square is representative of a type of material on a micro scale If you can send an electric charge through that material according to the fractal lattice structure of a given element, you will ALTER the structure of that element to form a perfect crystal. Atoms align according to the shape of the electric charge sent through that material. So if you send a fractal shaped electric charge through the material, you will create it's Ideal structure and it will be Much more reactive and pure than any other like particle. There is a theoretical battery from 1980 that can run forever called Electrinium. Another battery in Romanian Museum called “Karpen’s Pile.” John Hutchison created a crystal battery as well as Marcus Reid. There’s an unlimited amount of options because you can restructure any atomic lattice given that you have the code, or harmonic scales and overlay them in phase. Also look into the Kowski-Frost Experiment with crystals and manipulating the lattice, and the patents developed by Lonnie G Johnson’s Battery and JTEC Engine.
There is a company called Correlated Magnetics Research that is the only other people experimenting with different magnetization processes. Here is a video demonstration and explanation of their work. Programmable Magnets: http://www.youtube.com/watch?v=ocr_d_OTbpY Non Linear Magnetics: http://www.youtube.com/watch?v=pq_iPPfxg0w Max Field Magnets: http://www.youtube.com/watch?v=1auuL62SQqM Correlated Magnetics Research has a very unique magnetization process which realigns the atomic make up of a material to create a unique array. Here is a gaussian graph of CMR’s magnet to see the shape of the unique magnetic “imprint.” Notice the divets Just like the ground in the Egypt desert pictures. The Lower right hand picture is of a microscopic image taken of a Beetle’s Elytra. (Hydrophilus Triangularis) The holes in the desert floor are mimicking the Same image as seen on a SCARAB’s Shell.
To talk about the Attraction / Repulsion factor of magnets, we have to look at Walter Russell’s “Twin Opposing Vortexes” and the analogy of Snake Scales / Slinkys, or even 2 raging rapids running parallel. If both stream run the same way, that is “attract”. If they run against each other, that is “repel.”
The repulsion comes from the alignment of atoms which create moving streams of atomic / aetheric currents in 1 direction. Going against the current is “repel”. Going with the current, is “attract.” Imagine snake scales. The snake scales are all facing 1 direction so when the snake slithers, it moves the snake forward. If you try to rub 2 snakes together against the grain, the scales will dig into each other. (repel) If you try to rub 2 snakes together so the scales allow for a smooth glide... that would be attract.
These are some pictures of microscopic ordering of; A Fox Tail, Snake Scales, A Beetle’s Antenna, Porcupine Quill, Wasp Leg and Arrowhead.
All of these things show the flow of energy in a particular direction. That’s why they grow like that. And like the concept of an arrowhead only goes In. Tough to pull out because you’re fighting against a diode or oneway valve. Channeling the subtle currents of Aether / Random Ambient Energy is like carving a path for water or wind. Nature meanders. Guide the naturally occurring streams in perfect sine waves and the energy will accelerate along those channels. Straight lines is Most resistance. There is nowhere in the Universe that doesn’t have a rotating frame of reference.
“All direction is curved and all motion is spiral.” -- Walter Russell “Nature was my teacher.” -- Viktor Schauberger Schauberger’s Implosion Repulsine which sucked in air through helical slots. It pushed the air at tangential angles which induced a spiral flow.
Nothing ever travels in a straight line unlike Man’s Laws, or rather “Rules.”
But if you have fractal or repeating patterns where the water falls naturally, it will enhance the quality, reduce impurities, have lower surface tension and much more.
Imagine 2 slinkys corkscrewing through each other. The slinkys are 180 degrees Out of Phase and pushing forward with a Right Hand Twist. This is what people observe as attract:
Here is a moving graphic to help visualize. http://www.youtube.com/watch?v=HNHrkpz0uTs The slinkys represent Waves. Waves can pass through other waves (given they are in the right phase) But Mass cannot pass through other mass. Mass flows Around a wave. The mass collects where the waves go through, which gives the false impression that the mass is attracting. It’s not. The mass is seeking to Repel THROUGH each other. There is Repel away... and there is Repel THROUGH. The inward thrust of repel is misinterpreted as “attract” / “gravity” / “pull”. Inward Repulsion is a Vortex, and a vortex is ALL pushing forces. Man Made Magnets are cylindrical because of the sloppy magnetization process currently used the industry.
Nature’s magnets are Cones or 3D Phi Spirals.
Leonardo Da Vinci’s drawings.
This is the Flower of Life image, laser burned into a granite stone at the Temple of Dendera, over 12,500 years ago! The black and white picture is a cymatic pattern of dye in water. The glass of water is vibrated at a certain harmonic, and a 3D shape forms expressing the shape of the currents.
AS the conical energies pass through each other on the Z axis, a ring begins to expand radially outward on the X and Y axis. All Science observes is the Ring (Bloch Wall) which is a mere representation of 2 Conical streams of energy converging.
Look at the scientific piece of equipment called a Vortex Mixer. http://www.youtube.com/watch?v=uPgLMeQb7c8 The water is NOT being “pulled” down. The electricity from the power source is pushing through the wires. The magnetic field from the wires is pushing the stir bar in the bottom of the glass of water. As the electricity goes through the coil of wire in the black box and there is an Alternating Current back and forth. That makes the magnetic stir bar spin in the glass. All of this is pushing forces so far. No pulling involved. That magnetic stir bar is Pushing on the water around it which induces a vortex. All that water is being Pushed to form that vortex. All we Observe is the illusion that the tip of the vortex is being “pulled” down to the bottom of the glass. There is no pull. But what is the vortex?
The water isn’t the vortex. The water is merely taking the shape of the vortex. Remember Bruce Lee’s quote. “Be shapeless, formless, like water. Put water in a cup, it becomes the shape of the cup. Put water in a tea pot, it becomes the teapot. Now water can flow... or it can crash. Be water my friend.” Water doesn’t have any shape. It takes the form of what’s around it. So when you see a vortex, you’re seeing the shape of the uniform energy present. The water is not the vortex. The body is not the mind. The metal is not the magnet. The alignment of the water allows for a larger vortex to express itself. The alignment of the body allows for the mind to express itself. The alignment of the atoms making up a metal are allow for the subtle currents to express themselves. The water is being PUSHED to expand outward radially at the equator which then condenses at the poles and PUSHES inward according to Phi.
The inward thrust of electricity is mislabeled “pull” or “attract.” It’s an illusion of observation. Man has developed countless equations and branches of PSYENCE, dealing with the ASSUMPTION of pulling forces. So called “experts” and “geniuses” made up fake concepts like “dark matter” to justify their failed model of the Atom, the failed model of the Solar System, failed model of gravity and light, and a lot more.
One person can see Twin Opposing pushing forces in Nature and develop MANY practical and beneficial technologies. The rest of people will see a pulling force originating from “no where” that can never be proven. Technologies made from the foundation of “pulling forces” include Rocketry, Nuclear Bombs, and standard electro-magnetics. Technologies made from a foundation of Twin Opposing Pushing Forces includes: Rife Frequency, Tesla’s wireless electricity, UFO flight capabilities, Force Fields, Biomagnetism and more beyond comprehension. Those who made up the equations and models will defend them with their lives. Those who profit from the indoctrination of such equations will claim that anything other than their models is “pseudo-science” because their credibility and books sales depend on it... But who will listen to the information offered for Free? Too many geniuses in the Scientific Community and not enough Wise Men. “All it takes to become a genius is to surround one’s self with fools. Better to be a wise man then a genius. A wise man has logic of Nature regardless of who surrounds him. A genius can just be the village idiot who the masses hoist onto an infallible pedestal.” Einstein was CONSIDERED a genius. Walter Russell WAS a wise man. Tesla WAS wise man. Ed Leedskalnin WAS a wise man. Stephen Hawking is CONSIDERED a genius. Pier Luigi Ighina WAS a wise man. Dewey B Larson WAS a wise man. Viktor Grebbenikov WAS a wise man. John Searl IS a wise man.
The point is that there exists Completely different methods of magnetization that No One seems to be studying, funding or experimenting with other than John Searl and this CMR company. IF YOU THINK THERE IS ENOUGH REASONABLE ASSUMPTION AND VALIDITY TO THIS THEORY.... GET JOHN SEARL HIS FUNDING SO WE CAN SEE THIS PRACTICALLY APPLIED IN A PROFESSIONAL SETTING. SEG Mock Up vs SEG Prototype (Document): http://www.scribd.com/doc/75278338/SEG-Mock-Up-Verses-SEGPrototype-Stages-of-R-D 1st Visit to Searl Magnetics (March 11, 2011): http://www.youtube.com/watch?v=F_Lk1VFgvUk Q&A December 3, 2011 at Searl Magnetics: http://www.youtube.com/watch?v=GqPhwuakcLM Theory of Operation: http://www.youtube.com/watch?v=kJX17LgBYaQ SEG Background http://www.rexresearch.com/searl4/searl4.htm Design http://www.rexresearch.com/searl/searl.htm Russian Validations http://www.rexresearch.com/roschin/roschin.htm Searl Sites http://www.SearlSolution.com http://www.SwallowCommand.com http://www.JohnSearlStory.com
BioMagnetism of Insects and the Cavernous Structure Effect (CSE) as discovered by Viktor Grebbenikov. This is a picture of the shell from a water beetle (Hydrophilus Triangularis)
Ancient Egyptian structure outside of a Temple
Here is a hieroglyphic of 2 half spheres.I feel that the half sphere’s represent each half of the Scarab’s Shell (Elytra)
Here are 2 screen shots taken from a video uploaded by someone in Russia. The same location as Viktor Grebbenikov. Viktor claimed that when he accidentally dropped 1 half of the shell from the tweezers onto the other half... it levitated for a few moments before the eddy currents were disturbed.
I encountered a Very similar phenomenon while doing that with a Bee. It was running away from my tweezers slightly and when I went to lift my hand away, the bee body followed as if a cob web was attached. But no string, nothing. I used a paperclip to separate the thorax from the rear end of the bee and when I let go, they snapped together like 2 magnets.
I thought it was a fluke but kept playing. When I retracted the paper clip, the body followed and remained hovering underneath.
I got frustrated with the quality of the photo while hurridly trying to take pictures with one hand and holding the paper clip in the other steady.
So I changed the setting on the camera to Macro and took more pics. I did Not kill the bee. I found it dead on my front door step after a rain. Treat Nature with respect and it will offer you clues.
I took some video too but didn’t have it on the macro setting. By the time I figured out the macro setting on the camera I had broken up the nanoscopic parabolic array and it wouldn’t duplicate the same effects. The man at the podium speaking is Jerry Decker of KeelyNet.com and Vanguard Sciences. My name is Jason Verbelli and I’m just a guy who is interested in all this, trying to piece it together because I see validity. http://www.youtube.com/watch?v=PXH5VoKg5Cc
How does a seagull stay floating over a mountain range? How does a person stay floating while Parasailing? They catch the updraft.
The Feather has a nanoscopic array of funnels which contribute to the bird’s flight. Same with the bees. This is what they Really mean by teaching people about the birds and the bees. When it flaps the wings, it not only blows the air on our scale… but atomically as well. If Leonardo Da Vinci had the nanotechnology to create that array of feathers within feathers within feathers like a fractal…. Then the same amount of force you flap your arms would create lift. How does a bee levitate even though its wings aren’t big enough to aerodynamically create lift? It’s atomic structure is catching the atomic updraft from the Earth’s heat which radiates outward on the atomic scale. Look at the very symbol we use for “Radiation”. The circle symbolizes the Earth which projects heat out from all directions. The Earth is a Giant Radiation Area.
And if you catch the updraft on various scales, the mass in its entirety will lift. And if you create an array of mountain ranges on the atomic scale, you’re going to float.
We keep seeing this same shape and concept OVER and OVER.
The Twin Opposing Vortexes. Or Intersecting Cones. The upper left is the picture of Egypt’s desert with those strange divits in the ground. The upper right is a microscopic picture of the inside of that Hydrophilus Triangularis shell (Elytra) That grid / array of geometric shapes is on a concave surface to focus the Aetheric currents. That concave surface is a Cavernous Structure. The resulting effect is what Grebbenikov labeled the CSE, or Cavernous Structure Effect. The lower left corner is “Bashar’s” rendition of Walter Russell’s coils.Next to that is the Hindu “Sri yantra” in 3D which is representative of intersecting cones. When a water drop hits the meniscus of a fluid, it creates the same shape as all the others pictures. Something is going on here!
I think we need an array of these intersecting cones lining a concave surface on the microscopic, or even atomic scale. And need to be a dielectric material.
Bugs are made out of Chitin, which is cellulose based and dielectric. Like the Casimir Plates. The Casimir Effect is between 2 flat plates.
But that’s like a cubic wind tunnel. We want Sinusoidal wind tunnels. Helical / Conical as to catch and Reflect the energy. That’s on a micro scale.
What about "Casimir Tubes" where the atomic wind (electricity) can blow through the lattice more efficiently and we would reap much more energy on the other end because you aren't impeding the current. There is LIMITLESS potential in every wire. Meaning, if you align an atomic lattice orderly enough on small enough scales, you will allow for that same wire to have less impedance. Combining the concept of the Casimir Plates and Joe Cell would reap a Casimir Cell with concentric nanotubules, allowing for specific sized harmonic waves to blow through the lattice, yielding exponential results. I think solid wires are impeding electric current. Electricity is ATOMIC WIND. Wind needs to blow Through the lattice of atoms. So if you were to make copper nano tubes.. it would give the energy more room to breath. The wires wouldn't get as hot and you'd get a lot more energy because it's the scale of the wind tunnel that directs the flow of current. Smaller tubes, better efficiency. Solid wires are like a cave with stalagmites sticking out everywhere. The copper tubes need to be a small enough diameter so that there is an arc of plasma within each tube. Copper nanotubes would be exponentially more conductive than carbon nanotubes. It's the tubular structure that is generating efficiency, not the material. Normal carbon can't conduct electricity because of the ordering of the atomic lattice, giving science the false impression that carbon isn’t as conductive as copper. By nanoengineering it... the carbon acts as a diode for that energy at smaller scales. That nanoengineered carbon will be much better than standard copper. But if you nanoengineer the copper... you're getting ridiculous power. It’s all about order. The more order on smaller scales, the more energy you will reap with the same amount of force.
Nature’s slow duplication on the macro scale. Not as uniform. But there must be some harmonic within the Earth contributing to the formations like a geologic Cymatic (Chladni) pattern over the course of time.
Viktor Grebbenikov
The Earth is radiating heat from within. The heat is pushing outward away from the Earth. The heat is a wind. It’s a Very strong wind on the atomic level. So if we can align these suction cup looking things on the bottom of a surface... and they have that grid of cone shapes... I think if that grid was small enough, it would catch that ambient wind spiraling up from the Earth’s surface and lift that object from Aetheric Wind. Science would OBSERVE that as an object ‘riding a magnetic wave.” They can make up all the equations they want and all the cartoon models they can draw. It’s Aetheric Wind. Atomic currents. Period. Aether is sexy. It’s time to bring sexy back. My World – By Viktor Grebbenikov http://www.scribd.com/doc/31392711/My-World-by-Victor-Grebbenikov And 30 other books by BRILLIANT Wise Men and suppressed Sciences. http://www.scribd.com/my_document_collections/3113156
Leonardo Da Vini’s drawings followed by the work of Dan Winter. (http://www.fractalfield.com)
In reality, there is no magnetism like they teach. We are observing are electric PUSHING forces. Catch the outward atomic wind and you float. LIGHT is true Magnetism. Light is rest. All things in motion seek to achieve a state of rest. “The still magnetic Light of One.”
Ed Leedskalnin was a BRILLIANT and mysterious fellow from Latvia who built Coral Castle in Homestead, Florida using Very unconventional means of lift. He also carved the stones, quarried them and moved them by himself.
Coral Stone has many cavernous structures.
If you aren’t familiar with him watch this documentary hosted by Leonard Nimoy: http://www.youtube.com/watch?v=g9Pux2qllT8
When mass is in alignment, it allows for that Aetheric Wind to flow. If you are trying to cross a raging rapids, you will be pushed along with the stream. If that stream is on a small enough scale, people call that a Magnetic Current or Magnetic field. It’s a stream of air on a different scale. And if you try to touch that stream with your huge hand relative to the atoms making up your hand…. You will not affect the stream because it’s on another scale. Another “dimension” or frame of reference. The stream on that scale is going between the atoms making up our hand, therefore when we pick up a magnet it just feels like a regular piece of metal. If you could consciously shift the alignment of your hand (chi) you can alter the flow of energy and “attract” or “repel” matter. Flow is alignment. Alignment is healthy. If you’re body is aligned the energy will flow accordingly and you will reap the energy on the scale at which you are aligned. Why does a star shine? Because there is so much order on the atomic level, it allows for the still light already present to shine through the lattice of Mass and Energy shifting around.
The Light is already there. But it’s being obstructed by the motion of energy on various scales around us. Create order and the light can shine through the channels you create in the “medium” of space.
What is Enlightenment? It’s when the Human body is consciously aligned on the atomic level and beyond which allows for the Still Magnetic Light to shine through the lattice of your being. Literally glowing. Not some esoteric tem to mean, “I know more than you.” It’s an alignment within. “The Light is within You.” Anyone aligned like that (Jesus “Jmmanuel”, Buddha, Krishna) will affect the flow of energy of others, thereby restoring ease where there was disease. This is the Science of Spirituality. Religion is the commercialization of Spirituality and the bastardization of Science. Mass + and Energy Light is 0, the stationary fulcrum. If you align the mass and energy according to Feng Shui on that scale... you will achieve Light. It’s the random motion of mass and energy that is blocking the still magnetic light. That’s why we look into space and see darkness. We are observing the fluctuations of space. Light is the absence of all motion. Both Time and Space are in motion. Both Mass and Energy are in motion. All positive and negative forces are in motion. But Light IS. And it’s the absence of all motion. Thought is motion. Seeking a desire. Light is no desire. “The Light is within you.” “Be Still.” “Be Centered.” “Be Balanced.” All these ancient sayings are more than cliché. According to Alchemy and Pier Luigi Ighina, the Sun is Black. Or rather.... it’s a hole in time and space that is allowing the Light to Shine through the lattice of alignment. The deeper the hole on the atomic or aetheric scale.... the brighter the star. But it’s not just 1 hole. It’s like looking through a lattice.
This is a picture of a Quasicrystal. 5 Fold Symmetry thought to be impossible in Nature. Penrose lattice. A quasicrystal is 11 times harder than diamond. This picture was taken by Pier Luighi Ighina using his Lenticular Microscope he invented with Guglielmo Marconi. The Microscope could see in real color, in real time... and could slow the movement of an atom (magnet) to near zero.The microscope magnified 1.6 Billion times! It had an oval shaped lens that spun and another microscope attached looking at the inverse reflection in pulses. Like watching water fall in a darkened room only lit by a strobe light.By adjusting the speed of the flash, you can SEEM to stop the water in mid air or reverse it. John Keely claimed to observe the same phenomenon with his microscopes.
The book Quadriuvium is a Must have for people interested in waves, resonance, harmonics, art, etc.
This is a Cosmic Dehydration Device called Aquapol. Water will retreat from the walls of a household even in humid areas next to the ocean. There will never be any wood rot or wet molds.
Document and Brochure: http://www.scribd.com/doc/47781686/Aquapol-Cosmic-Dehydration-byWilhelm-Mohorn
Ancient Egypt Clues to Energy and Aetherics
There is so much more to discuss and show, it’s BEYOND COMPREHENSION. But like CERN, NASA, Plasma Study, Nuclear Technology, etc… This stuff takes FUNDING, ACKNOWLEDGEMENT AND SUPPORT.
4th Law of Thermodynamics: If you have enough evidence to create reasonable doubt for any of the first 3 laws…. No funding for You!
You get what you pay for. And you pay for what you want most. The people of the world pay for gas, oil, radiation, and the carcinogens that come with it. For war, for company bailouts, etc. We must Really want all that stuff! Money spent on war, gas, oil, nukes, bailouts .... $1,864,592,488,503,009,778,021,599 (and rising) Money spent on New Energy Technologies ... $0 Follow the money as they say. If they are too big to fail, then we must be too small to succeed. Rather than dropping another 25 million dollar missile on some poor person’s home in Afghanistan... why not hold off on 1 missile, give that money to people like John Searl, John Bedini, Marko Rodin, Andrea Rossi or SOMEONE who will try something new rather than spending BILLIONS of dollars to repeat our actions expecting different results. We all know Einstein’s famous quote regarding Insanity. All I’m saying is... if the Pentagon spent $84 million dollars today... why can’t we get 1? All I’m saying is... if BP oil can make 5.6 BILLION dollar PROFIT after spilling oil in the Gulf of Mexico.... Why can’t we get 1 million? All I’m saying is... if the Federal Government can print fiat currency notes out of thin air to bail out banks and car companies for BILLIONS of dollars... why can’t they just print some more out so WE can have some too? If free energy technologies were given equal funding to NASA or CERN, we would feed the world rather than bomb the world. You get what you pay for. So... what are YOUR tax dollars doing these days?
